Step 1:Load up Shareaza

Step 2:Go To View and set it to power mode

Step 3:Go to Settings,Downloads

Step 4: In the downloads section set maximun files,maximun transers, and transfers per file to 128. Change were it says max in Total Download Bandwidth to 1.95 Mb/s and maximum que length to 4. Only download and upload to networks which are connected box should be unchecked.

Step 5:Go to Network,Guntella

Step 6:Force this node to become a hub and accept only hub connections should be unchecked. Also, Hub to Hub and Hub to Leaf should be unchecked. The rest of the boxes should be checked. The numbers in or for G2 is:2,290,6 G1 is:2,2,2

Step 7: Go to Network,Edonkey

Step 8:It should say stop searching after 201 results and connect to more than 1080 other edonkey clients. All three boxes wil be checked.

Step 9: Hit aplly and hit OK

Step 10:Wait for G2 and edonkey to connect when G2 connects it will says G2: hubs 1 , G1 will eventually connect later.