On Oct 17, 5:06 am, "Chris De Herrera" <ch...@pocketpctalk.com> wrote:
> Hi,
> Check with Imate regarding a rom upgrade. This is the most common way
> problems are fixed.
>
> --
> Chris De Herrerahttp://www.pocketpcfaq.comhttp://www.tabletpctalk.comhttp://www.pocketpctalk.comhttp://www.mobilitytalk.com
>
> Windows Mobile Device Center FAQs -http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> ActiveSync Troubleshooting Guide -http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>
> "News" <du...@dummy.com> wrote in message
>
> news:%23AtsYQFDIHA.464@TK2MSFTNGP02.phx.gbl...
>
>
>
> > Imate Jasjam WM5, Sprite Backup, spb Mobile Shell, VC 1.6, Telstra Network
> > Australia
>
> > I have been looking for something to help with duplicate alarms (previous
> > post) and tried Scarybear which I ended up hard resetting from, and last
> > night tried the trial of SKTools which again I ended up doing a hard
> > reset.
>
> > The problem- Something in the optimise / clean function on both programs
> > causes issues with activsync basically it stops working but only on the
> > device end and only for USB connection. I am still able to connect with
> > IR.
>
> > So some searching on the net found that maybe I should UNcheck the "Use
> > Advanced Network Functionality" and yes this worked BUT it use to work
> > with this checked.
>
> > So I restored from a backup but the problem persisted. I then did a hard
> > reset which obviously fixed the problem and then restored from the same
> > backup and still all was OK.
>
> > Maybe someone else has had similar problems and found a fix or is there a
> > known issue.
>
> > Can we even identify what is causing the problem?
>
> > I'm not after an answer per say just curious.
>
> > --
> > Dan Field
> > (Surveyor)- Hide quoted text -
>
> - Show quoted text -

....which won't help, as what the OP's describing is a bug within WM5
with the notifications queue that never got fixed.
Typically this will get screwed, resulting in no notifications,
repeated alarms etc.

There are a number of tools to clear the notification queue, such as
Scarybear's checknotifications, Memaid, SK Tools etc. Unfortunately,
there are entries in the NQ that control Activesync - and if you're
not careful these can get cleared, which will break Activesync.
Scarybear's software does this, for example.

Specifically, RunAtRndisFnDetected will have been deleted.

Happily, you can recreate this and it'll work - see
http://www.cs.pitt.edu/~jmisurda/ppc...y051203-201515
for a script that'll do this for you. I've successfully used this
several times on my HTC Wizard.

Regards,
Ric

Thanks ric I'll try it out next time

--
Dan Field
(Surveyor)

OWR Surveyors and Town Planning Consultants
90 Herries Street
Toowoomba, Qld. 4350
Ph: (07) 4638 0517
Fax: (07) 4638 0528
dfield@owrsurv.com.au
"ric" <publicmail@infobubble.co.uk> wrote in message
news:1192717995.560886.290460@v23g2000prn.googlegr oups.com...
> On Oct 17, 5:06 am, "Chris De Herrera" <ch...@pocketpctalk.com> wrote:
>> Hi,
>> Check with Imate regarding a rom upgrade. This is the most common way
>> problems are fixed.
>>
>> --
>> Chris De
>> Herrerahttp://www.pocketpcfaq.comhttp://www.tabletpctalk.comhttp://www.pocketpctalk.comhttp://www.mobilitytalk.com
>>
>> Windows Mobile Device Center
>> FAQs -http://www.pocketpcfaq.com/faqs/wmdc/index.htm
>> ActiveSync Troubleshooting
>> Guide -http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>>
>> "News" <du...@dummy.com> wrote in message
>>
>> news:%23AtsYQFDIHA.464@TK2MSFTNGP02.phx.gbl...
>>
>>
>>
>> > Imate Jasjam WM5, Sprite Backup, spb Mobile Shell, VC 1.6, Telstra
>> > Network
>> > Australia
>>
>> > I have been looking for something to help with duplicate alarms
>> > (previous
>> > post) and tried Scarybear which I ended up hard resetting from, and
>> > last
>> > night tried the trial of SKTools which again I ended up doing a hard
>> > reset.
>>
>> > The problem- Something in the optimise / clean function on both
>> > programs
>> > causes issues with activsync basically it stops working but only on the
>> > device end and only for USB connection. I am still able to connect with
>> > IR.
>>
>> > So some searching on the net found that maybe I should UNcheck the "Use
>> > Advanced Network Functionality" and yes this worked BUT it use to work
>> > with this checked.
>>
>> > So I restored from a backup but the problem persisted. I then did a
>> > hard
>> > reset which obviously fixed the problem and then restored from the same
>> > backup and still all was OK.
>>
>> > Maybe someone else has had similar problems and found a fix or is there
>> > a
>> > known issue.
>>
>> > Can we even identify what is causing the problem?
>>
>> > I'm not after an answer per say just curious.
>>
>> > --
>> > Dan Field
>> > (Surveyor)- Hide quoted text -
>>
>> - Show quoted text -
>
> ...which won't help, as what the OP's describing is a bug within WM5
> with the notifications queue that never got fixed.
> Typically this will get screwed, resulting in no notifications,
> repeated alarms etc.
>
> There are a number of tools to clear the notification queue, such as
> Scarybear's checknotifications, Memaid, SK Tools etc. Unfortunately,
> there are entries in the NQ that control Activesync - and if you're
> not careful these can get cleared, which will break Activesync.
> Scarybear's software does this, for example.
>
> Specifically, RunAtRndisFnDetected will have been deleted.
>
> Happily, you can recreate this and it'll work - see
> http://www.cs.pitt.edu/~jmisurda/ppc...y051203-201515
> for a script that'll do this for you. I've successfully used this
> several times on my HTC Wizard.
>
> Regards,
> Ric
>