Hi !

There are 2 scenarios:

1. very occasionally, I am not able to get IP address after I
unplug my device and later plug it back.

2. I sometimes use some utilities like pskill to teminate the
activesync process (rapimgr.exe, wcescomm.exe & WCESMGR.exe). Later I
restart Activesync. The device sometimes cannot get connected. I
think it's the IP address.

So I have a question. When the device cannot get IP address, what
do I do ? Any advice please ?

Thanks very much for your help !

Hi,
Is this issue with not getting an IP address occuring when you quickly
unplug and replug a device? If so then you may have to unplug and wait
approximately 1 minute. I suspect that the issue is in the setup and
teardown of the drivers.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.pocketpctalk.com
http://www.tabletpctalk.com
http://www.mobilitytalk.com

"flahmeshess" <dingdongdingding@yahoo.com> wrote in message
news:c94941be-e4e0-41ed-8025-af946809f5cf@f36g2000hsa.googlegroups.com...
> Hi !
>
> There are 2 scenarios:
>
> 1. very occasionally, I am not able to get IP address after I
> unplug my device and later plug it back.
>
> 2. I sometimes use some utilities like pskill to teminate the
> activesync process (rapimgr.exe, wcescomm.exe & WCESMGR.exe). Later I
> restart Activesync. The device sometimes cannot get connected. I
> think it's the IP address.
>
> So I have a question. When the device cannot get IP address, what
> do I do ? Any advice please ?
>
> Thanks very much for your help !

Hi Chris. Thanks for the reply. But I waited for a long time and I
needed to reboot to solve the problem.

On Jul 23, 10:51 pm, "Chris De Herrera" <s...@pocketpctalk.com> wrote:
> Hi,
> Is this issue with not getting an IP address occuring when you quickly
> unplug and replug a device? If so then you may have to unplug and wait
> approximately 1 minute. I suspect that the issue is in the setup and
> teardown of the drivers.
>
> --
> Chris De Herrerahttp://www.pocketpcfaq.comhttp://www.pocketpctalk.comhttp://www.tabletpctalk.comhttp://www.mobilitytalk.com
>
> "flahmeshess" <dingdongdingd...@yahoo.com> wrote in message
>
> news:c94941be-e4e0-41ed-8025-af946809f5cf@f36g2000hsa.googlegroups.com...
>
> > Hi !
>
> > There are 2 scenarios:
>
> > 1. very occasionally, I am not able to get IP address after I
> > unplug my device and later plug it back.
>
> > 2. I sometimes use some utilities like pskill to teminate the
> > activesync process (rapimgr.exe, wcescomm.exe & WCESMGR.exe). Later I
> > restart Activesync. The device sometimes cannot get connected. I
> > think it's the IP address.
>
> > So I have a question. When the device cannot get IP address, what
> > do I do ? Any advice please ?
>
> > Thanks very much for your help !