I have a bizarre hibernation problem on my T^1. I goes into
hibernation mode just fine but immediately after shut down it turns
itself right back on. Any ideas?

Do you have "Wake On LAN" enabled? This can happen if WOL is enabled, the
NIC is set to wake on "directed packet" and another machine on the LAN tries
to access it. I know that's a pretty rare combo, but I've seen it.
Louis

<Jim@earthlink.com> wrote in message
news:qb2cv39gumk5nu0ih7glhtparc05e9lo15@4ax.com...
> I have a bizarre hibernation problem on my T^1. I goes into
> hibernation mode just fine but immediately after shut down it turns
> itself right back on. Any ideas?

Louis:
You are a genius good call but.

You are correct but..I went to the bios and shut off wake up on lan
(actually rest the bois to deault setting where it was off) and same
problem. However when I shut off the wireless the problem went away
so anty suggestion


On Fri, 4 Apr 2008 08:23:26 -0700, "3c273" <nospam@nospam.com> wrote:

>Do you have "Wake On LAN" enabled? This can happen if WOL is enabled, the
>NIC is set to wake on "directed packet" and another machine on the LAN tries
>to access it. I know that's a pretty rare combo, but I've seen it.
>Louis
>
><Jim@earthlink.com> wrote in message
>news:qb2cv39gumk5nu0ih7glhtparc05e9lo15@4ax.com.. .
>> I have a bizarre hibernation problem on my T^1. I goes into
>> hibernation mode just fine but immediately after shut down it turns
>> itself right back on. Any ideas?
>

I take it back you are good...I found the setting was also in the
Wireless driver changes it there and it worked THANKS

On Fri, 4 Apr 2008 08:23:26 -0700, "3c273" <nospam@nospam.com> wrote:

>Do you have "Wake On LAN" enabled? This can happen if WOL is enabled, the
>NIC is set to wake on "directed packet" and another machine on the LAN tries
>to access it. I know that's a pretty rare combo, but I've seen it.
>Louis
>
><Jim@earthlink.com> wrote in message
>news:qb2cv39gumk5nu0ih7glhtparc05e9lo15@4ax.com.. .
>> I have a bizarre hibernation problem on my T^1. I goes into
>> hibernation mode just fine but immediately after shut down it turns
>> itself right back on. Any ideas?
>

Glad you got it sorted out. It took me a long time to figure that one out.
Louis

<Jim@earthlink.com> wrote in message
news:5ibdv3t82d8tb1bnvb08bqpldlrtn1q2lp@4ax.com...
> I take it back you are good...I found the setting was also in the
> Wireless driver changes it there and it worked THANKS
>
> On Fri, 4 Apr 2008 08:23:26 -0700, "3c273" <nospam@nospam.com> wrote:
>
> >Do you have "Wake On LAN" enabled? This can happen if WOL is enabled, the
> >NIC is set to wake on "directed packet" and another machine on the LAN
tries
> >to access it. I know that's a pretty rare combo, but I've seen it.
> >Louis
> >
> ><Jim@earthlink.com> wrote in message
> >news:qb2cv39gumk5nu0ih7glhtparc05e9lo15@4ax.com.. .
> >> I have a bizarre hibernation problem on my T^1. I goes into
> >> hibernation mode just fine but immediately after shut down it turns
> >> itself right back on. Any ideas?
> >
>