![]() |
|
|
|||
|
problem mounting video dvd, mandriva 2008.1
Hi,
system: mandriva 2008.1 i586 Optiarc DVD RW AD-7200S gigabyte GA-K8NF-9 (n-force 4 chip set) amd athlon 3000+ problem: all media mounts in dvd drive except commercial video dvd when issuing the mount command the computer takes about 1 minute and then responds: [chris@develop ~]$ sudo mount -t iso9660 /dev/sr0 /media/cdrom/ mount: No medium found This drive worked fine under 2007.1 (I don't have that installed in another partition though) What should I do to resolve this? Thanks... Chris Roy-Smith |
|
|||
|
Re: problem mounting video dvd, mandriva 2008.1
On Wed, 23 Jul 2008 18:55:13 -0400, Chris Roy-Smith <chris_roysmith@internode.on.net> wrote:
> mandriva 2008.1 i586 > problem: > all media mounts in dvd drive except commercial video dvd > [chris@develop ~]$ sudo mount -t iso9660 /dev/sr0 /media/cdrom/ > mount: No medium found Are you sure hal/udev hasn't assigned a different device name? What's the output of "cat /etc/udev/rules.d/61-block_config.rules" and "ls -l /dev/dvd"? May also be a copy protection scheme. Have you tried reading the dvd with dvdrip, from plf? Regards, Dave Hodgins -- Change nomail.afraid.org to ody.ca to reply by email. (nomail.afraid.org has been set up specifically for use in usenet. Feel free to use it yourself.) |
|
|||
|
Re: problem mounting video dvd, mandriva 2008.1
David W. Hodgins wrote:
> On Wed, 23 Jul 2008 18:55:13 -0400, Chris Roy-Smith > <chris_roysmith@internode.on.net> wrote: > >> mandriva 2008.1 i586 >> problem: >> all media mounts in dvd drive except commercial video dvd >> [chris@develop ~]$ sudo mount -t iso9660 /dev/sr0 /media/cdrom/ >> mount: No medium found > > Are you sure hal/udev hasn't assigned a different device name? > What's the output of "cat /etc/udev/rules.d/61-block_config.rules" and > "ls -l /dev/dvd"? > > May also be a copy protection scheme. Have you tried reading the dvd > with dvdrip, from plf? > > Regards, Dave Hodgins > Thanks Dave Problem solved! mounts okay as either sr0 or cdrom now. The ony change I made was to add plf, and add mandvd. whatever was wrong, I will never know, but I wish I did! regards Chris Roy-Smith |
![]() |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|