Good morning everyone,

I am hoping that someone can with a couple of problems that I am
having, I have asked the members over at the EW forum however this
problem looks like it may be exceeding the scope of EW.

A few weeks ago I downloaded the trial version of Microsoft Expression
Web, a week or so later I purchased a new WD hard drive (I only had 3g
left on my old one). When I installed my new drive I cloned the
contents from my old drive using the WD software and also made my new
drive the master and my old drive the slave.

After I cloned my drive I started having problems with opening EW,
the installer wanted to install for a second or two then EW would open
only to have about 10% of the features available. At this point I
tried to uninstall EW and I received an error saying that the
installer was not able to completely uninstall. I have also attempted
to install a fresh copy of EW over my current copy and the installer
encounters a problems and needs to close, so that idea went out the
window.

One of the members of Microsofts EW forum suggested that I use the
"msicuu2" tool, when I downloaded this tool and attempted to install
it I received the following error:

Script: C:\Docume~!\*********\Locals~!Temp\IXP000.TMP\Star tmsi.vbs
Line: 1
Char: 1
Error: ActiveX component can't create object:
'Scripting.FileSystemObject'
Code: 800A01AD
Source: Microsoft VBScript runtime error

After doing a couple of hours of research of this specific error, none
of the answers appear to be specific to my problem.

Does anyone have any suggestions of what my next step should be the
fix this problem.

TIA,

Ron

Ron,

Try this:

An error occurs while installing the Windows Installer Cleanup Utility:
http://www.winhelponline.com/article...p-Utility.html

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
Winhelponline.com blog http://www.winhelponline.com/blog


"Ron S" <r.stiles.jr@gmail.com> wrote in message news:d588323b-f838-4671-8f6d-ec6a3dea2cd6@s19g2000prg.googlegroups.com...
Good morning everyone,

I am hoping that someone can with a couple of problems that I am
having, I have asked the members over at the EW forum however this
problem looks like it may be exceeding the scope of EW.

A few weeks ago I downloaded the trial version of Microsoft Expression
Web, a week or so later I purchased a new WD hard drive (I only had 3g
left on my old one). When I installed my new drive I cloned the
contents from my old drive using the WD software and also made my new
drive the master and my old drive the slave.

After I cloned my drive I started having problems with opening EW,
the installer wanted to install for a second or two then EW would open
only to have about 10% of the features available. At this point I
tried to uninstall EW and I received an error saying that the
installer was not able to completely uninstall. I have also attempted
to install a fresh copy of EW over my current copy and the installer
encounters a problems and needs to close, so that idea went out the
window.

One of the members of Microsofts EW forum suggested that I use the
"msicuu2" tool, when I downloaded this tool and attempted to install
it I received the following error:

Script: C:\Docume~!\*********\Locals~!Temp\IXP000.TMP\Star tmsi.vbs
Line: 1
Char: 1
Error: ActiveX component can't create object:
'Scripting.FileSystemObject'
Code: 800A01AD
Source: Microsoft VBScript runtime error

After doing a couple of hours of research of this specific error, none
of the answers appear to be specific to my problem.

Does anyone have any suggestions of what my next step should be the
fix this problem.

TIA,

Ron

Ramesh,

Thank you for your reply, after some hunting around I was able try
your recommendation, however when I received the following error:

Error registering the OCX C\Windows\System32|sccrun.dll

Is there another solution for this?

Thanks,

Ron

Please correct the typo and try again.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
Winhelponline.com blog http://www.winhelponline.com/blog


"Ron S" <r.stiles.jr@gmail.com> wrote in message news:f2c89fd4-6b17-4271-b0ca-7152e05b7749@m1g2000pre.googlegroups.com...
Ramesh,

Thank you for your reply, after some hunting around I was able try
your recommendation, however when I received the following error:

Error registering the OCX C\Windows\System32|sccrun.dll

Is there another solution for this?

Thanks,

Ron

On Apr 6, 10:13 am, "Ramesh, MS-MVP" <ramesh@unknownhost> wrote:
> Please correct the typo and try again.
>
> --
> Regards,
>
> Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
> Windows® Troubleshootinghttp://www.winhelponline.com
> Winhelponline.com bloghttp://www.winhelponline.com/blog
>
> "Ron S" <r.stiles...@gmail.com> wrote in messagenews:f2c89fd4-6b17-4271-b0ca-7152e05b7749@m1g2000pre.googlegroups.com...
>
> Ramesh,
>
> Thank you for your reply, after some hunting around I was able try
> your recommendation, however when I received the following error:
>
> Error registering the OCX C\Windows\System32|sccrun.dll
>
> Is there another solution for this?
>
> Thanks,
>
> Ron

Ramesh,

Sorry for the typo, the following is the error I receive during the
Windows Script 5.6 install:

Error registering the OCX C:\WINDOWS\system32\scrrun.dll

After I select the OK button the next pop-up tells me that the Windows
Script 5.6 has been installed. I have tried using the msicuu2 tool and
the same error occurs. I am also still not able to uninstall EW.

I am also considering completing a repair install, do you think that
this may help these specific problems?

Thanks again,

Ron

Ron,

Tried the regsvr32 command as stated in the article?

If so, post the exact error code/message you received when running the command.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
Winhelponline.com blog http://www.winhelponline.com/blog


"Ron S" <r.stiles.jr@gmail.com> wrote in message news:30f65a6a-7a6b-4863-9cdd-f37c4ad2d6d8@i36g2000prf.googlegroups.com...
On Apr 6, 10:13 am, "Ramesh, MS-MVP" <ramesh@unknownhost> wrote:
> Please correct the typo and try again.
>
> --
> Regards,
>
> Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
> Windows® Troubleshootinghttp://www.winhelponline.com
> Winhelponline.com bloghttp://www.winhelponline.com/blog
>
> "Ron S" <r.stiles...@gmail.com> wrote in messagenews:f2c89fd4-6b17-4271-b0ca-7152e05b7749@m1g2000pre.googlegroups.com...
>
> Ramesh,
>
> Thank you for your reply, after some hunting around I was able try
> your recommendation, however when I received the following error:
>
> Error registering the OCX C\Windows\System32|sccrun.dll
>
> Is there another solution for this?
>
> Thanks,
>
> Ron

Ramesh,

Sorry for the typo, the following is the error I receive during the
Windows Script 5.6 install:

Error registering the OCX C:\WINDOWS\system32\scrrun.dll

After I select the OK button the next pop-up tells me that the Windows
Script 5.6 has been installed. I have tried using the msicuu2 tool and
the same error occurs. I am also still not able to uninstall EW.

I am also considering completing a repair install, do you think that
this may help these specific problems?

Thanks again,

Ron

Ron,

Tried the regsvr32 command as stated in the article?

If so, post the exact error code/message you received when running the command.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
Winhelponline.com blog http://www.winhelponline.com/blog


"Ron S" <r.stiles.jr@gmail.com> wrote in message news:30f65a6a-7a6b-4863-9cdd-f37c4ad2d6d8@i36g2000prf.googlegroups.com...
On Apr 6, 10:13 am, "Ramesh, MS-MVP" <ramesh@unknownhost> wrote:
> Please correct the typo and try again.
>
> --
> Regards,
>
> Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
> Windows® Troubleshootinghttp://www.winhelponline.com
> Winhelponline.com bloghttp://www.winhelponline.com/blog
>
> "Ron S" <r.stiles...@gmail.com> wrote in messagenews:f2c89fd4-6b17-4271-b0ca-7152e05b7749@m1g2000pre.googlegroups.com...
>
> Ramesh,
>
> Thank you for your reply, after some hunting around I was able try
> your recommendation, however when I received the following error:
>
> Error registering the OCX C\Windows\System32|sccrun.dll
>
> Is there another solution for this?
>
> Thanks,
>
> Ron

Ramesh,

Sorry for the typo, the following is the error I receive during the
Windows Script 5.6 install:

Error registering the OCX C:\WINDOWS\system32\scrrun.dll

After I select the OK button the next pop-up tells me that the Windows
Script 5.6 has been installed. I have tried using the msicuu2 tool and
the same error occurs. I am also still not able to uninstall EW.

I am also considering completing a repair install, do you think that
this may help these specific problems?

Thanks again,

Ron

Ramesh,

I have tried the regsvr32scrrun.dll command prompt and I receive the
following error:

Dll RegisterServer in sccrun.dll failed. Return Code Was: 0x80004005

Thanks again,

Ron

Ramesh,

Thank you for your assistance, after completing a repair install and
updating to SP2 and all of the updates I was able to finally install
the utility.

Thank you again for your help, it is appreciated.

Ron

Sorry for the delay Ron... caught up into a web host migration problems! <sigh>

Glad you got this fixed after a repair install! FYI, 0x80004005 is caused due to incorrect registry permissions. Fixing up the permissions for a couple of keys would have resolved the problem.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
Winhelponline.com blog http://www.winhelponline.com/blog


"Ron S" <r.stiles.jr@gmail.com> wrote in message news:3221ee0b-bafb-4008-b42f-ecb5b92da34b@u36g2000prf.googlegroups.com...
Ramesh,

Thank you for your assistance, after completing a repair install and
updating to SP2 and all of the updates I was able to finally install
the utility.

Thank you again for your help, it is appreciated.

Ron