Error message: The page cannot be displayed
View products that this article applies to.
Article ID : 241344
Last Review : December 3, 2004
Revision : 6.2
This article was previously published under Q241344
Important This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/) Description of the Microsoft Windows Registry
On This Page
SYMPTOMS
Internet Explorer 5 and later
Internet Explorer 4.x
CAUSE
RESOLUTION
You receive the error message after you install Internet Connection Sharing with AOL
MORE INFORMATION
REFERENCES
APPLIES TO

SYMPTOMS
Internet Explorer 5 and later
When you try to view a Web page, you may receive the following error message:
The Page cannot be displayed.
When you are connected AOL 4.0, while you are starting Microsoft Internet Explorer 5.5, you may receive the following error message:
iexplore caused an invalid page fault in module
Back to the top

Internet Explorer 4.x
When you try to view a Web page, you may receive the following error message:
An internal error occurred in the Windows Internet extensions.
If you are using AOL, you may receive the following error message:
WAOL caused an invalid page fault in module
Note If you receive either error message after you upgrade to Microsoft Windows Millennium Edition, see the following article in the Microsoft Knowledge Base:
274498 (http://support.microsoft.com/kb/274498/) "The page cannot be displayed" error message after upgrading to Windows Me
Back to the top

CAUSE
This problem may occur if any one or more of the following conditions is true: • Internet Explorer connection settings are incorrect.
• An incorrect entry exists in a Hosts file.
• The Winsock.dll, Wsock32.dll, or Wsock.vxd file is missing or damaged.
• There are multiple copies of the Winsock.dll, Wsock32.dll, or Wsock.vxd file, or one of these files is in the wrong folder.
• TCP/IP is not installed or is not functioning correctly.
• The WinSock2 registry key is damaged.
• The Internet Connection Sharing installation is damaged or is not functioning.
• The Rnr20.dll file is missing or damaged or the "Library Path" value in the following registry key is missing or contains the wrong location:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\WinSock2\ Parameters\NameSpace_Catalog5\Catalog_Entries\0000 00000001
• If you are using America Online (AOL) or CompuServe, there may be parental control restrictions applied to the account.
• Incorrectly configured or non-functioning firewall or proxy software.
Note When you try to view Web pages in Internet Explorer after you install MSN (Microsoft Network) 5.1, you may have similar symptoms.

This problem may occur if Internet Explorer is configured to use a proxy server to search when none is specified.
Back to the top

RESOLUTION
Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To resolve this issue, configure Internet Explorer to automatically detect settings. To do this, follow these steps.

Note If you receive the error message after you install Internet Connection Sharing with AOL as your Internet service provider (ISP), see the "If you receive the error message after you install Internet Connection Sharing with AOL" section.1. Delete your temporary Internet files and cookies. To do this, follow these steps:a. Click Start, point to Settings, and then click Control Panel.
b. Double-click Internet Options.
c. Under Temporary Internet Files, click the Settings button.
d. Click the View Files button.
e. Press CTRL+A to select all files.
f. Press DEL or click the Delete option at the top of the window.
g. Click the Yes button on the dialog box that appears.
h. After all the files are gone, close the window.
i. Click OK two times.
j. Close Control Panel.
Note Before you go to step 2, remove any firewall, Internet security, or proxy software.
2. Verify that you can connect to your ISP and the connection settings for Internet Explorer are correct. To do this, use one of the following methods: • Verify that the Use a Proxy Server check box is cleared if you do not use a proxy server. To view this check box, start Internet Explorer, click Internet Options on the Tools (or View) menu, click the Connections tab, and then click LAN Settings for LAN, DSL, and cable modem users. If you use a dial-up modem, click the dial-up connection on the Connections tab, and then click the Settings button.
• Try a different access number to the ISP that is not a toll number.

3. If you cannot connect, remove and reinstall Dial-Up Networking. To do this, follow these steps.

Notes• If your computer is running Microsoft Windows 95, determine if Dial-Up Networking 1.2 or 1.3 is installed. To do this, look in Add/Remove Programs. Dial-Up Networking 1.2 or 1.3 should be listed on the Install/Uninstall tab. If either of these is listed, remove it before you follow these steps.
• You must have your Windows CD-ROM to follow these steps.
• Remove AOL before you follow these steps. Contact AOL for information about how to back up any personal data before you remove the service.
• You may be able to resolve this problem by reinstalling Dial-up Networking upgrades.
• Follow these steps if you receive an error message that is similar to any one of the following error messages:
An internal error occurred in the Windows Internet Extensions.
Unable to create a network socket connection.
Unable to initialize windows sockets interface.
To remove and reinstall Dial-Up Networking, follow these steps: a. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Programs.
b. On the Windows Setup tab, click Communications, and then click Details.
c. Clear the Dial-Up Networking check box, and then click Yes if you receive a message that Dial-Up Networking is required by other components.
d. Click OK until you are prompted to restart your computer. If you are not prompted to restart your computer, restart it manually.
e. After Windows restarts, repeat steps a. through d., except select the Dial-Up Networking check box in step c.

4. Click Start, point to Programs, and then click MS-DOS Prompt.
5. Type ping 127.0.0.1 at the prompt, and then press ENTER. If you receive four replies, go to step 6. If you do not receive four replies, remove, reinstall, and then configure TCP/IP.

Note AOL must be removed before you follow these steps. Contact AOL for information about backing up any personal data before you remove the service.

To remove TCP/IP, follow these steps:a. Click Start, point to Settings, click Control Panel, and then double-click Network.
b. Click a component on the Configuration tab, click Properties, and then note the component settings. Repeat this step until you have recorded the configuration information for all your components.
c. Remove all TCP/IP-related network components from network properties. To do this, click a component on the Configuration tab, and then click Remove. Repeat this step until all TCP/IP-related network components are deleted from network properties, click OK, and then click Yes when you are prompted to restart your computer. If you are not prompted to restart the computer, do so manually.
To reinstall and configure TCP/IP, follow these steps:a. Click Start, point to Settings, click Control Panel, and then double-click Network.
b. On the Configuration tab, click Add, click Protocol, and then click Add.
c. In the Manufacturers box, click Microsoft, in the Network Protocols box, and then click TCP/IP.
d. Click OK two times, and then click Yes when you are prompted to restart your computer. If you are not prompted to restart your computer, do so manually.

Note You may receive "version conflict" error messages. If you receive this error message, click No when you are prompted to keep a newer version of each file.
e. Repeat step 5.

6. Connect to your ISP, and then start Internet Explorer. Try to visit www.microsoft.com by name and by the Internet Protocol (IP) address. If you can connect by using the IP address but not the fully qualified domain name (FQDN), look for entries in the Hosts file on the local computer. To do this, follow these steps:a. Click Start, point to Find, and then click Files or Folders.
b. In the Named box, type hosts, and then click your hard disk in the Look in box.
c. If you find the Host file, open the file in Notepad to view the contents. If there are no entries other than the entry for the local host (for example, 127.0.0.1 Localhost), contact your ISP about potential problems with their DNS server.

7. If a Web site does not load when you use either the FQDN or IP address, click Start, point to Programs, click MS-DOS Prompt, and then try to ping a known good Web site by using both the FQDN and IP address.

Note Many larger Web sites have this feature disabled. Therefore, you cannot ping these sites.

If you can ping the site by using the IP address but you still receive the following error message, go to step 8:
Page can not be displayed
If you cannot ping the site by using either the FQDN or IP address, verify that you can still ping the local host (127.0.0.1), and verify that the Library Path value in the following registry key is pointing to the correct location for the Rnr20.dll file:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\WinSock2\Parameters\NameSpace_Catalog5\Catalog_ Entries\000000000001
8. View Network properties for multiple instances of the TCP/IP protocol that are bound to the dial-up adapter.
9. Look for multiple instances of the Winsock files. Rename any file that is not in the appropriate folder unless it is in an AOL folder, C:\Windows\Sysbckup, or C:\Windows\Ws2bakup. The following folders are correct for the Winsock files:
Winsock.dll in C:\Windows
Wsock32.dll, Wsock.vxd, Wsock2.vxd, Ws2_32.dll in C:\Windows\System
The dates and versions of these files should match the version of Windows and the system date for that version, except when Winsock2 or DUN 1.3 have been added to Windows 95. If you find a C:\Windows\Ws2bakup folder, Winsock2 has been installed, and DUN 1.3 is listed in the Add/Remove Programs tool in Control Panel if it is installed.

To rename and replace the Winsock files, follow these steps: a. Click Start point to Find, and then click Files or Folders.
b. In the Named box, type the correct file name (for example, type wsock32.dll, winsock.dll, or wsock.vxd), click your hard disk in the Look in box, and then click Find Now.
c. To rename extra copies of the files, right-click the file, click Rename, and change the file name extension to .old. For example, rename the Wsock32.dll to Wsock32.old.

Note If you receive an error message that a file by that name already exists, type a different file name extension (for example, .zzz). If you receive an error message that the file cannot be renamed because it is in use, restart the computer to a DOS prompt, and then rename the file from DOS.
For additional information about the correct dates and sizes of these files, click the following article numbers to view the articles in the Microsoft Knowledge Base:
135539 (http://support.microsoft.com/kb/135539/) Windows 95 CD-ROM directory listing (4 of 5)
150440 (http://support.microsoft.com/kb/150440/) Windows 95 Service Pack 1 CD-ROM directory listing (4 of 5)
158193 (http://support.microsoft.com/kb/158193/) Windows 95 OEM Service Release 2 CD-ROM directory (5 of 6)
188428 (http://support.microsoft.com/kb/188428/) Windows 98 CD-ROM directory listing (1 of 14)
238664 (http://support.microsoft.com/kb/238664/) Windows 98 Second Edition CD-ROM directory listing (1 of 14)
10. If your computer is running Microsoft Windows 98 or Windows Millennium Edition, go to step 13. If your computer is running Windows 95, look for the Ws2bakup.bat file on your hard disk. To do this, follow these steps:a. Click Start, point to Find, and then click Files or Folders.
b. In the Named box, type ws2bakup.bat, click your hard disk in the Look in box, and then click Find Now.
c. If you find the file, go to step 11. If you do not find the file, go to step 13.

11. After you locate the Ws2bakup.bat file, follow these steps: a. Click Start, click Run, type c:\windir\ws2bakup\ws2bakup.bat in the Open box, where windir is the folder where you installed Windows, and then press ENTER.

Note If you receive an error message that a sharing violation has occurred, press A to stop running this command. Repeat this step until the batch file has finished running.
b. Click Start, and then click Shut Down.
c. Click Restart the Computer in MS-DOS Mode, and then click OK.
d. At the command prompt, type c:\windir\ws2bakup\ws2bakup.bat, and then press ENTER.

Note If you receive an error message while you are updating the registry, ignore the error message.

12. Type exit to restart Windows.
13. Export and delete the WinSock2 registry keys that are located in the following registry keys.

Note Remove AOL before you follow these steps. Contact AOL for information about how to back up any personal data before you remove the service.
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VXD\AFVXD

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VXD\DHCP

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VXD\MSTCP

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VXD\Winsock

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VXD\Winsock2

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Winsock

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\WinSock2

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\RemoteAccess\Authentication\SMM_Files
14. Remove and reinstall TCP/IP to rebuild the registry keys before you test the connection in the next step. You also may have to remove and reinstall DUN if you remove the SMM_files key.

For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
218822 (http://support.microsoft.com/kb/218822/) Error Message: Rundll32 caused an invalid page fault in module Rnaui.dll
Warning Do not follow step 15 if you are running Windows Millennium Edition.
15. If you still receive the error message, you may have to manually remove TCP/IP and Dial-Up Networking.

For additional information about how to remove and reinstall Dial-Up Networking and TCP/IP files, click the following article number to view the article in the Microsoft Knowledge Base:
181599 (http://support.microsoft.com/kb/181599/) How to remove and reinstall dial-up networking and TCP/IP files

Back to the top

You receive the error message after you install Internet Connection Sharing with AOL
If you receive the error message after you install Internet Connection Sharing with America Online (AOL), verify that there are no parental restrictions on the account. If you receive the error message after you install Internet Connection Sharing and AOL is your Internet service provider (ISP), verify that TCP/IP (shared) is bound to the AOL adapter and not to the dial-up adapter. By default, if both the dial-up adapter and the AOL adapter are listed in Network Neighborhood when Internet Connection Sharing is installed, TCP/IP (shared) binds to the dial-up adapter. You must remove Internet Connection Sharing and remove the dial-up adapter from Network Neighborhood, and then reinstall Internet Connection Sharing and verify that TCP/IP (shared) is now bound to the AOL adapter. You can then reinstall the dial-up adapter.
Back to the top

MORE INFORMATION
For additional information about how to determine which folder Windows is installed in, click the following article number to view the article in the Microsoft Knowledge Base:
305792 (http://support.microsoft.com/kb/305792/) How to determine which folder Windows is installed in
For additional information about how to troubleshoot error messages in Internet Explorer, visit the following Microsoft Web site:
http://support.microsoft.com/default.aspx?pr=ie (http://support.microsoft.com/default.aspx?pr=ie)
Back to the top

REFERENCES
For additional information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
219843 (http://support.microsoft.com/kb/219843/) Problems using Internet Explorer with incorrect Hosts file
175722 (http://support.microsoft.com/kb/175722/) Error message: Internet Explorer cannot open the Internet site...
175039 (http://support.microsoft.com/kb/175039/) Error message: A connection to the server could not be established
188952 (http://support.microsoft.com/kb/188952/) 'Internal error occurred' error message using Internet Explorer
222909 (http://support.microsoft.com/kb/222909/) Error message: Internal error in Windows Internet Extensions
185533 (http://support.microsoft.com/kb/185533/) TCP/IP does not work after upgrading to Windows 98
191064 (http://support.microsoft.com/kb/191064/) Error messages when running TCP/IP-based utilities or programs
238550 (http://support.microsoft.com/kb/238550/) Cannot browse the Internet using Internet Explorer while connected to AOL
158474 (http://support.microsoft.com/kb/158474/) Windows TCP/IP registry entries
181599 (http://support.microsoft.com/kb/181599/) How to remove and reinstall dial-up networking and TCP/IP files
234815 (http://support.microsoft.com/kb/234815/) Description of Internet Connection Sharing
238135 (http://support.microsoft.com/kb/238135/) How to troubleshoot Internet Connection Sharing problems
Back to the top


--------------------------------------------------------------------------------

APPLIES TO
• Microsoft Internet Explorer 6.0, when used with:
Microsoft Windows Millennium Edition
Microsoft Windows 98 Second Edition
Microsoft Windows 98 Standard Edition

• Microsoft Internet Explorer 5.5, when used with:
Microsoft Windows 98 Second Edition
Microsoft Windows 98 Standard Edition
Microsoft Windows 95

• Microsoft Internet Explorer 5.01, when used with:
Microsoft Windows 98 Second Edition
Microsoft Windows 98 Standard Edition
Microsoft Windows 95

• Microsoft Internet Explorer 5.0, when used with:
Microsoft Windows 98 Standard Edition
Microsoft Windows 95

• Microsoft Internet Explorer 4.01 Service Pack 1
• Microsoft Internet Explorer 4.01 Service Pack 2
• Microsoft Internet Explorer 4.01 128-Bit Edition
• Microsoft Internet Explorer 4.0 128-Bit Edition

Back to the top

Keywords: kberrmsg kbwinme msiew98 msiew95 kbprb KB241344

SOURCE: http://support.microsoft.com/kb/q241344/